SFS NVELOPE NV Rainscreen Double Bracket 180mm with 6.5mm Slots

Suitable as a back frame system – NV1 is for face fixing/rivet fixing cladding elements to e.g. fibre cement, high-pressure laminate (HPL), ACM and metal rainscreen panels. NV1 is the basis of all NVELOPE support systems.

NVELOPE brackets come in standard depth dimensions of 40—300 mm and use their 1.5" of adjustability to handle cavity depths from 1.85" to 13.5". The brackets are offered as singles and doubles for the wind load and dead load, respectively. Additionally, brackets are designed for attachment to different substrates, such as steel, concrete, or wood, by having 6.5 mm and 11 mm holes.

A simple cladding support system typically consists of 'helping hand' brackets which are fixed to the substrate at set vertical and horizontal separations. There are vertical brackets (these will be used in the majority of cases) and horizontal brackets. Profiles are then fixed into brackets.

• Adjustability: bracket "helping hand" allows for rail insertion depth up to 1.5" max
• Fast & easy to install: the "helping hand" bracket holds the rail in place to allow up to 50% faster install
• Thermally efficient: the green isolators (hard polypropylene isolator) provides a thermal break to reduce energy loss through wall assembly

Profiles are attached to brackets by a combination of fixed and flexible points to allow for dead and dynamic loads. Flexible points are vital due to the differing thermal performances of the materials being combined.

Using a preliminary survey of the wall and architectural structural design, a grid layout for the subframe is prepared. Brackets are then fixed to the substrate wall using stainless steel fixings of appropriate size for the design. The pull-out value of the securing fixings should be determined on site from the pull-out strength and appropriate safety factor as given in BS 5427-1: 1996.

*Packaging on these products may be damaged or showing signs of wear and tear and may be reboxed but all products are in good working condition. These products are non-returnable and non-refundable and once they are gone they are gone.