Engineered Herringbone Hard Wax Oiled Oak Wood Floor Natural White Oak (Pack of 60)

Product code: TW-E955

This is an ethically sustainable sourced engineered timber wood floor designed for use as an interior floor finish. Engineered wood floors are more sustainable than solid and minimise the impact on valuable resources. The construction means that these wood floors are more stable than solid floors.

Board performance:

• Fire Protection: Reaction to fire – wood flooring performs to EN 13501-1 Dn s1
• Thermal Conductivity: EN ISO 10456 and EN ISO 12664 Result 0.15 W/(mk)
• Moisture Content: EN 13183 - 1 Requirement: 6% to 9% Average Results: <7%
• Thermal Conductivity: EN ISO 10456 / EN ISO 12664 Result 0.15 W / (mk)
• Release of Formaldehyde: Class E1 | EN 717 – 1:2006 Result 0.014 mg / m3 - Requirement: Less than 3 ppm Result: 0.0053 ppm
• Slip Resistance: Tested to BS 7967-2: 2002 (Pendulum Test in PTV values) - UV Oiled Finish results: DRY (66) LOW RISK WET (29) MODERATE RISK. There is no current requirement for slip resistance in residential developments
• Suitability of use: Suitable for use with under floor heating in commercial and residential applications
• Effects from moisture: Wood flooring will expand if it is exposed to conditions that increases its moisture content
  beyond 9%. Wood flooring will contract if the prevailing conditions reduce the product 
  moisture content below 6%. Any exposure outside of these parameters will compromise the performance of the product
• Transmission of Sound: Wood flooring on its own will offer some assistance to reduce the passage of sound, but it is the build-up of the whole floor and the surroundings that contribute to impact and airborne
  sound. For accurate assessment’s a qualified engineer should be employed to calculate how to achieve accurate results
• Thermal properties: Solid Wood Flooring boards offer the following values: 20mm thick boards with a 4mm or 6mm top layer will lose 0.10 K/WWm2 - 15mm boards with a 4mm or 6mm top layer will lose 0.08 K/Wm2

Specifications:

• Wood type: Oak – Quercus SPP
• Size: 15mm x 70mm x 350mm long
• Finish: Hard Wax Oil
• Length: 350mm
• Profile: Tongue and grooved with left-handed & right-handed pieces
• Pattern: Herringbone
• Edge Profile: Micro Bevel (all four sides)
• Top Layer: Solid Oak top layer 4mm thick
• Construction: Engineered, plywood backing
• Adhesive: Dynea adhesive that meets European standard E0 used in the construction
• Grade: ABCD Mixed Grade with colour variation & knots (see grading document for details)
• Packing: Cardboard cartons, shrink wrapped 60 pieces per carton (LH & RH) and 1.47m2 per carton
• Weight: Each carton will weigh approx. 16kgs
• Underfloor Heating: This floor is suitable for underfloor heating which must be operational before installation
• Certification: FSC® 100%

*Packaging on these products may be damaged or showing signs of wear and tear and may be reboxed but all products are in good working condition. These products are non-returnable and non-refundable and once they are gone they are gone.